jhammons01
07-21-2005, 02:42 AM
yes this one is hard. It is torqued to 95 ft lbs and has red lock tight on it. You'll need an impact or a really big breaker bar....something like 4' Once off the bearings inside the front cover will have to be reset.
| JOIN THE FORUM LOUNGE! By Joining The Forum Lounge you will be able to see the pictures in this thread and post a reply. Also, after 25 posts you'll be able to see the hidden forums as well! It's free and all of your information is confidential. |
Join in on this Discussion and see the pictures. Click here-> : 19mm front Pulley nut
jhammons01 07-21-2005, 02:42 AM yes this one is hard. It is torqued to 95 ft lbs and has red lock tight on it. You'll need an impact or a really big breaker bar....something like 4' Once off the bearings inside the front cover will have to be reset. Bob_the_Normal 07-23-2005, 02:30 AM Pffft... put a socket on that bitch and have someone hold it still while you TRY to break the flywheel nut loose and you won't have a bit of trouble. -_- I haven't heard of people having trouble with that 19mm so much as the stupid flywheel nut, that bitch is tough. --Gary |
| JOIN THE FORUM LOUNGE! By Joining The Forum Lounge you will be able to see the pictures in this thread and post a reply. Also, after 25 posts you'll be able to see the hidden forums as well! It's free and all of your information is confidential. |