Look at this asshole:

http://cgi.ebay.com/ebaymotors/RX7-FAST-ENGINE-12A-ROTARY-PORTED-AND-TUNED-TO-10SEC_W0QQitemZ7991097987QQcategoryZ33615QQrdZ1QQc mdZViewItem

Look at this asshole:

http://cgi.ebay.com/ebaymotors/RX7-FAST-ENGINE-12A-ROTARY-PORTED-AND-TUNED-TO-10SEC_W0QQitemZ7991097987QQcategoryZ33615QQrdZ1QQc mdZViewItem

Ask him the port timing specs and watch his brain frizzle.

You mean like "Black Magic" (RX-7 Club)/"V8-7" (Torque Central, same person) who claims he doesn't start his daily driver/race Honda for less than $1,000 a race, and that he beat an SLP Camaro the other day for $1,500? :roll:

You mean like "Black Magic" (RX-7 Club)/"V8-7" (Torque Central, same person) who claims he doesn't start his daily driver/race Honda for less than $1,000 a race, and that he beat an SLP Camaro the other day for $1,500? :roll:

Also has the brown first gen with the non HO 302?

Also has the brown first gen with the non HO 302?No, he has an FD shell that he's supposed to be putting an LS1 in, but is apparently having trouble funding the project, despite all his big dollar races. Claims he's rich and that he's already built several cars so far this year, so I asked what the hold-up was with the FD. :)

He's currently ranked #3 (from worst) in reputation on RX-7 Club forum, and he's working his way down the list on Torque Central as well.

You mean like "Black Magic" (RX-7 Club)/"V8-7" (Torque Central, same person) who claims he doesn't start his daily driver/race Honda for less than $1,000 a race, and that he beat an SLP Camaro the other day for $1,500? :roll:

What about the guy who challenged NoCab then never came back to the forum?

Hahahaha I just questioned this asshole, lets see what he has to say!

What about the guy who challenged NoCab then never came back to the forum?cdk4219?

He was bragging about having 485 RWHP before his blower belt was even installed, from what I heard. He never did produce a dyno sheet either before or after the $1,500 challenge, and he keeps a very low profile these days. :D

Q: So what exactly are the port timing specs of the motor (i.e. intake/exhaust). Also is this motor a Street Port, Bridgeport, 1/2 Bridgeport? I am also interested in seeing a dyno sheet or timeslip for the RX3 that ran that 10 second pass. What were you using for engine management on this motor? Was it carbed or F/I? Thanks ahead of time for your answers, I hope to hear from you soon. 1revnrex
Aug-09-05

A: wow im gettin 2manny emails but ill answer all plus this one its the most interesting. the car has quatro puente (bridgeport)i got the time slip when we did the last pass even though my driver lost control we hit 11.3 send me ur email and ill send pics holley carburated


That was his answer.... and he actually sold the motor.

10.8@111mph.....

Could easily be put in car show condition. Looks straight out of Fast and the Furious except without bad paint FX. (Taken out of description.)

http://cgi.ebay.com/ebaymotors/STUNNING-1990-Mazda-RX-7-5-spd-HOT-MODS-UNDERGLOW_W0QQitemZ4567875018QQcategoryZ6327QQrdZ1 QQcmdZViewItem

hey Kevin you should buy mine. I'm no liar. Only a few hours left!

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&rd=1&item=7992117012&ssPageName=STRK:MESE:IT

10.8@111mph.....

jammin on the brakes like a mofo before teh traps, ya hurrd?

He apparently has no clue about differences in octane either. I asked him that question since he reffered to 87 as "cheap gas" and his response was that if I bring my car up to redline with 87 I'll blow my motor.

I see he knows a whole lot about rotaries.

He apparently has no clue about differences in octane either. I asked him that question since he reffered to 87 as "cheap gas" and his response was that if I bring my car up to redline with 87 I'll blow my motor.

I see he knows a whole lot about rotaries.


I turn 8500 rpms in my car with 87 octane, I must be fucked now.

OMG that baby is going to kill himself!!!!!!!!