Anyone want to buy my truck that I never seem to have any time for??

Dude!? No!

How much?

Specs on motor S4 13BT?

Just seeing if there is any interest....we'll see

I have no real reason to get rid of it, I just have not spent any time on it for about a year!!

I'll admit, I'm interested. I'd hate to see all your work go to waste.

It's an s5 T2 that has a 1st gen front cover and oil pan, which allows for the mounting on the front. I have a slew of extra parts.

Truck is rust free have the entire harness and some extra harness pieces.

Turbo manifold will have to be custom, unless the frame is cut and boxed for the stock one

It is a solid project

I have 2 drive shafts one is a 2 piece, it does have an aftermarket fuel pump, but Im not sure what it is.

You're making me sad.

And totally turning me on.

I'd get it for the preservation of the project. But in my current state, I can't buy it. :(

I quit my job.

Everything is there to make it happen with the stock ECU besides the drive shaft and the intercooler. The swap would mount right into your FB!

Too much work and schoo?

Everything is there to make it happen with the stock ECU besides the drive shaft and the intercooler. The swap would mount right into your FB!

But then you wouldn't have your truck. And I wouldn't have my money!

But it would swap in quite well, I suppose.

Put up numbers before we go any further.

Oh I really don't know, I am open for reasonable offers. Like I said, I really do not need to get rid of it.

Maybe you just want the 13bt and everything that goes with it?

Dude, if you got it running, you could totally drift it.

That thing would be a LOT of fun... I'd make it a burnout truck

Just imagine drifting a truck. As much as I dislike drifting, that would be friggin sweet.

If only it weren't 13 hours away!

I actually bought the truck off someone in Texas, someone I knew was traveling back from there so he trailered back to WI. I've had it for almost 3 years now...maybe I just need more encouragement!!

I'll give you good BJ if you do it.

Not the type of encouragement I was looking for

Does the wife have to mention it instead of nag about it?

How about you sell it on the low-low to me, and then we get other people on the forum to contribute parts and pieces and we make it a GRM $2009 vehicle?

I would be willing to deliver it a certain distance. There are also a lot of extra parts. Humor me with offers

http://www.theforumlounge.com/d/13937-2/100_2576.jpg

http://www.theforumlounge.com/d/13940-2/100_2577.jpg

http://www.theforumlounge.com/d/13950-2/100_2581.jpg

I'll trade you a really nice couch, the entire twin turbo system off an FD (including the intake manifolds and IC), a fullsize van full of RX-7 parts (logicons, manifolds, injectors, etc), the van itself (rebiult 351W engine, but it sat, van is basically worthless except as a shed and for the engine cuz of the blown trans), some good rotors and rotor housings, a paperclip (http://www.theforumlounge.com/paperclip-sale-t9410.html?&highlight=paperclip), a thumbtack, a push-pin, and a stock S4 turbo.


If you have the free time for the 13 hour drive here and back, and want all this crap, I'm all for it :)

I'll trade you a stock mercury tracer with an auto trans.

And... you want a swimming pool?

I'll trade you a stock mercury tracer with an auto trans.

And... you want a swimming pool?


I have a swimming pool....and with the tracer wouldn't I be labeled a homo?

I'll trade you a really nice couch, the entire twin turbo system off an FD (including the intake manifolds and IC), a fullsize van full of RX-7 parts (logicons, manifolds, injectors, etc), the van itself (rebiult 351W engine, but it sat, van is basically worthless except as a shed and for the engine cuz of the blown trans), some good rotors and rotor housings, a paperclip (http://www.theforumlounge.com/paperclip-sale-t9410.html?&highlight=paperclip), a thumbtack, a push-pin, and a stock S4 turbo.


If you have the free time for the 13 hour drive here and back, and want all this crap, I'm all for it :)

Man, if only there were two paperclips

What!? No deal.

I have a swimming pool....and with the tracer wouldn't I be labeled a homo?

Mine's a 28 footer.

And I'll throw in some exhaust for an FB/B2200 w/ a 12A

Anyone else interested?

So you really want to get rid of it?

:( makin me sad

If I was working, I'd buy it, maybe.

We'll see. The wife told me I need to get rid of it if I buy something else, and that is almost a done deal, and I pick that up next week. Not sure what is going to happen. Unless I can find some where to store it.

Maybe I should post it on 7club and see if I get any takers

I'm interested, next time you're driving it around here, be sure to swing by, maybe I can get it running for you :P

:D

hahahaha...thats a good one!!!

I really don't think it would take me much time to get it going, just need to purchase somethings, plus this thing probably won't be very good on gas

Price?

Whatcha got?

I want that (motor) so badly!!

S5 ECU, RTek 2.0, bigger turbo, even though it's stock port, I could make it work.

As of today, I have $100 in the bank, and $40 on plasma.

I need to stop wanting that.

I've got to pay for school next year, which will be about $1900 +books.

Give me a price, please, just tickle my teaser, please.

Just the motor? I would probably give you the motor and everything associated with it for...750?

Holy Freaking Crap!

too much? I am losing some money on it but...I could probably pick up a stock motor and swap into the truck to make up the difference

You tease! I just ran and told my dad. His jaw mated with the floor for a moment.

Ah.... to be poor.

I think I paid like 900 to my door for the motor tranny ecu and harness.

:(

I feel like crying. Why, oh why, did I go back to college!?

oh come on....I'll probably just finish it....I may have some things lined up that would enable this to happen.

My buddy just bought a 93 FD and is dropping in a built LS6 out of a GTO


Oh yeah.. STAY IN SCHOOL!!

I'll take that FD's motor. No sense in him sending it to the junk yard. I'll pay twice its scrap weight.

nah he bought it without the motor, he should have it done by the end of may

Damn, that's sweet.

He should bring it to MRR '08, and you your truck, which you must finish. You just have to.

when is it this year?

Ummm... I have it on a magnet somewhere.

It coincides with the ALMS and Generac 500. Um, Aug 7-10, this year.

I actually have off this year....we'll have to see what happens

It would be wicked, man. Lots of GOOD beer with me, for sure.

Last year, on the way down, my FB took a dump on the highway. So depressing. This year, I'll be there, for sure, with the FB, not just my dad's Camry.

What happened to Kevin's and Alex's posts?

Well... yeah... I've been thinking about this my whole geography class.

If you're not in too much a hurry, or could do payments, we'd be in business. Somehow, I doubt that.

you want the whole thing? or just the motor...1100 for everything

1100 for everything? That isn't too bad, either.

So much to chew on.

When does the wife want it out of there?

it could sit here for as long as you need....clean tx title...I never transferred it since it would have been a waste of money

I will deliver it too

Lemme chew on that fat for a bit.

Have you chewed on it long enough yet??

I'm still poor, bro. Sorry.

I hope you sell her to someone that loves her as much as I would.

You can make payments if you want...I would rather it go to someone who really wants it

I'm still poor.

now that looks like fun...

if i didnt already have an FCmoneypitofdoom... i would snach that up....

Ebay

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=002&sspagename=STRK%3AMESE%3AIT&viewitem=&item=120268150575&rd=1

Good luck, amigo!

We shall see, I listed it a long time ago and it got to like 400. If anything I will buy a stock motor, pull the rotary and sell them separate

You'd probably make more that way...

I don't think I'll be the buyer, though. I am without job, still. fucking HR BS.

Man, it's summer time..go work a resort or a bar

It's too late, now.

All the jobs are gone, because I was GUARANTEED a job, so I thought, "Gee, I don't need to apply elsewhere." I can;t even get a new radiator for the FB... :(

Damn it man if I wasnt in FL I'd be all over this project. Some fat ass in town has a swapped B2000, I love that truck.

there are shipping companies ya know. I think for around 400-600 they can get it there for you...cheaper then you coming to get it

Truck has been sold....it is going to become electric!

still have the t2 swap set up for a 1st gen

What's the price on that?

What do you want to give me...I'm pretty reasonable and I may take trades, but you can't pay me in Beer

Lol.

I'm just curious. My rotary/project days are probably gone for good.

I'm not real sure what I am going to do yet...I would have no luck finding a decent FB around here. We have a '31 model A Sedan that I might tackle. It needs tranny work, but a mustang II front end and a 327 would be a nice swap

. We have a '31 model A Sedan that I might tackle.

Now that's something I'd trade you some shit for!

It runs and drives?

All original, there is some bondo but otherwise it runs good. We also have a 31 coupe with a rumble seat, that is in a lot better shape

Always wanted a sedan for some reason.

I would seriously Love to get my hands on that thing. You should post a pics of those things one of these days.

here they are

http://img444.imageshack.us/img444/5971/picture048sh4.jpg

http://img259.imageshack.us/img259/797/picture050rz6.jpg

My folks inherited them from my mom's cousin, along with most of the guns and numerous other things. He used the sedan as a dd for quite some time after he finished it. The coupe was finished in the early 80's and not driven much, until now. My dad loves taking them for short trips out in the country where they live.

One reason for getting rid of the truck was to possibly bring the sedan home, but we'll see what happens

Seriously holler at me if you ever decide to get rid of that sedan.

Pretty sure it's not going to happen, these things are becoming harder and harder to find at a decent price. People only want them for the good bodies and then turn them into rat rods.

The coupe has been driven more in the last year then probably the last 20

Hell yeah.


You should T2 swap the coupe.....

That would be insane

Bad ass is what it's be.

If you rat rod either of those A's, DO THE T2 SWAP!

It'd blow peoples minds, maybe make some folk angry.

You'd have the only one though, that's for sure...

wouldn't be too difficult either...I might need to discus this with the old man this next week

I've had these two pics for awhile now.....I always thought it would be cool to toss a rotary in an old car like that....Only I wouldn't paint it gay pink....
http://img294.imageshack.us/img294/2028/sevenstock2007123vn8.jpg
http://img376.imageshack.us/img376/3572/sevenstock2007125vh8.jpg

If anything, do a 20B swap, with monster port job.

still have the t2 swap set up for a 1st gen

Mucho interestedo.

IR sad panda.