I want to trade my mountains of FC RX-7 parts/services for tools.

I litterally have a van full of RX-7 parts (Manifolds, turbos, engine parts, Volvo/Supra/FD FMICs, FD twins, S4/S5 NA/TII Diffs and Trannies, etc etc)

I have two eaton M90 Twisted-Rotor Helical Roots blowers, one rebiult, one ported. (I was planning to use them both on my Vanagon, but then I got my hands on a Lysholm)

I will provide porting and rebiuld services by mail, but I wont tune your car unless you bring it to me, and I won't biuld you a wiring harness unless you bring the car.

I'll also trade tools for tools, (I've got Snap-On, Matco, MAC, S&K, Craftsman, etc etc) or pay outright if nessisary.

Also, I'll sell this stuff for money, and I do take PayPal.

If pictures are wanted, they can be posted!


ANYWAY! The things I'm looking for are:

I'm looking for bench tools, such as a decent bench grinder/wire wheel, and a belt sander.

I'm looking for more air tanks for my compressor. Pig tanks are fine, but bigger is preffered. I'll take a whole compressor if I have to. :P

I wouldnt mind trading for ball-bearing tool cabinets, but I'm not particularly in the market for them, though I wont turn down a good deal.

Strange tools are a big plus, I love strange or antique tools.

I could use a spring compressor, torque sticks,

I'll even take tools I already have duplicates of, as long as they are of a decent quality.

Air tools are great, hand tools are great, quality tools are great.

Oh yes, I also have five 19 inch CRT monitors.

You can have those for FREE (or trade, if you're feeling nice) if you pick them up, but SOON (Thursday afternoon is a good time to pick them up)

Sure, whatcha want?

what do you have for snap on, looking for 3/8" impact swivel sockets, any diesel service tools, SAE crowfoots

TII rear diffs? I'm interested.

edit
wait... you want tools. I only have money.

what do you have for snap on, looking for 3/8" impact swivel sockets, any diesel service tools, SAE crowfoots

What I got to trade, that I can think of right now is, 36" Snap On prybar black handle, 434M 1/2" impact gun MAC(new style). Both used the prybar is in real good shape.

what do you have for snap on, looking for 3/8" impact swivel sockets, any diesel service tools, SAE crowfoots

I'll get back to you on that this weekend.

How much for a 2 TII manifolds and the turbos and stuf like that? I'm looking to turbo my NA. This is just an IDEA not a for sure...

PMed.

TII rear diffs? I'm interested.

edit
wait... you want tools. I only have money.

Hey, I take money too :P

Homer: "Aww man, twenty dollers? I wanted peanuts"
Brain: "$20 can buy many peanuts!"
Homer: "Explain how!"
Brain: "Money can be exchanged for goods and services!"
Homer: "WOO!"

Do you want my tools?

Kinda.

Let me check on what I can get you first and how much it's worth.

I gotta wait till the weekend for that anyway :)

talk to me about those Eaton M90's you have....prices??

For you guys, I'll say $210 each, tested and good, they don't need work, the ported one is only a mild port (I can change that, should you wish) but it needs a new front pully.

The couplers on both of them are in prime condition, no cracks or even shavings.

Go ahead, try and find a better price :)

Want pictures?

I could custom build you a workbench. I'm in the middle of doing one right now.

And you all should join my www.rx7classifieds.com site, dammit!

I could custom build you a workbench. I'm in the middle of doing one right now.

Already have one tho, thanks :)

I'm glad you said no, it's a LOT of work to do the one I'm doing now. :)

I wouldnt want to have to pay for shipping either :D

It's a good offer, as good workbenches don't just grow on trees.

I'm doing this one with a stacked 2 x 4 counter top that looked pretty cool in my "Family Handyman" magazine.

The counter top is 18 2 x 4s glued/screwed together on their sides, then I'll be sanding them flush and probably putting epoxy on them.

pix?

Sure, soon. I'm sanding it down today.

Exactly how much of a TII rear end do you have? Come april 07 I am going to start my TII swap, and I will need to do the drive train. Do you have the rest of the drivetrain parts (shaft, rear end, half shafts)?

I _CURRENTLY_ have two full drivetrains.

But I just started to tear down one of the transmissions to rebiuld it.

- Jason

I'm doing this one with a stacked 2 x 4 counter top that looked pretty cool in my "Family Handyman" magazine.

The counter top is 18 2 x 4s glued/screwed together on their sides, then I'll be sanding them flush and probably putting epoxy on them.

Why sand when you have a planer?

I've done the first third of the top, and it's almost as smooth as glass.

Holy shit.

And to think, I bought that planer a year ago and never used it. Glad I have it.

On a side note, Tofu do you have any aftermarket T2 springs?

Yeh . . .
. . . on my TII :P


But I have some stockers in relitively good condition here. I could clean them up and paint them some bright orange or green color with some engrish on them.

I shall call them "Tofuball Springz: bounce of next generation and fast"

And they will be $50 for a set ;)

If you still have your stuff come april, I would like to buy it. :)

Yeh . . .
. . . on my TII :P


But I have some stockers in relitively good condition here. I could clean them up and paint them some bright orange or green color with some engrish on them.

I shall call them "Tofuball Springz: bounce of next generation and fast"

And they will be $50 for a set ;)

I'm looking at buying a T2, and the back is sagging... I know it needs springs.

I'm looking at buying a T2, and the back is sagging... I know it needs springs.

I like my eibach springs, good street spring.

I wouldnt reccomend it at all for the track though :)

If you still have your stuff come april, I would like to buy it. :)

Sure thing :0

Also, I get new stuff in all the time, so just ask about it when you need it.

hello

Hello!

I havent forgotten about you

Just all my stuff is in boxes and I'm working hard to get it all sorted (I moved recently)

I havent found anything you've asked for yet. But I know somone who does, if you PM me your phone number I'll relay it to him (Or I can give you his phone number if you are more comfortable with that)

- Jason

The only thing I really want to be Snap-On is the impact swivel sockets, but I might end up buying a set tomarrow, because the job I am in the middle of is being a PITA without them. I will let you know. The others can be MAC, SK, or Snap On.

Also I have a Knipex(through MAC) Raptor I might be willing to trade.

I can PM you my e-mail if that works, otherwise looong distance.

Got the impact swivels today, still looking for diesel service tools, crowfoots, and half moon wrenches.

Sure thing :0

Also, I get new stuff in all the time, so just ask about it when you need it.
Awesome, come early april I should be bugging you for shit!

Got the impact swivels today, still looking for diesel service tools, crowfoots, and half moon wrenches.

Call my buddy Mark Stuart at 301-898-1705 and tell him what tools you need.

Don't call too late or early though :P

I buy as much from him as I can, he's got fantastic prices on some really high quality stuff.

- Jason

im lookin for a ea86 or ea85 corolla give cash for it