worklog: 88 MX6 GT + 87 RX7 TII = 87 MX7 GTII?? (yes. i'm tackling this project)

thx i'll let ya know.

__________________
ZOOM ZOOM ZOOM
1995 Jeep Grand Cherokee Laredo
2.5" Thrush Glasspack, 2" BB, ProComp 3000 Shocks, Pacer Daytonas, 31x10.5x15 A/T's

NP: Keep us posted on this project

oh will do for sure. lol.

i'm so stoked about this thing its not even funny.


i also really really miss boost .

__________________
ZOOM ZOOM ZOOM
1995 Jeep Grand Cherokee Laredo
2.5" Thrush Glasspack, 2" BB, ProComp 3000 Shocks, Pacer Daytonas, 31x10.5x15 A/T's

OH SNAP!!!!!



why yes those are s5 tail lights


and what have we here? BBS FC3C Rims AAAAND drilled/slotted rotors????




yep. mazdaspeed racing seats.


not pictured:
rx7.com lowering springs
KYB adjustable shocks


WOOOOOOT!!!!!

__________________
ZOOM ZOOM ZOOM
1995 Jeep Grand Cherokee Laredo
2.5" Thrush Glasspack, 2" BB, ProComp 3000 Shocks, Pacer Daytonas, 31x10.5x15 A/T's

I might have a logicon + idiot cluster if you need

__________________
The blog: Tofuball's Worklog

Read The Bible - it's the Word of God.

thanks but idk how well that'll do me. all the idiot lights are in the MX-6's OEm dash. and tahts what i'll be using witha little bondo work i think.

as of right now, i'm not collecting any parts. i need to focus on just getting the motor done and in there and being able to drive it. until i drive it, my wrists will continue to bleed.

i'm sure once i find what parts i need later on i'll be posting up WTB ads everywhere from my local forum to here to rx7club

__________________
ZOOM ZOOM ZOOM
1995 Jeep Grand Cherokee Laredo
2.5" Thrush Glasspack, 2" BB, ProComp 3000 Shocks, Pacer Daytonas, 31x10.5x15 A/T's

Should have just come to spartanburg and bought the finished MX7 sitting at my warehouse. Just needs a megasquirt. Let me know when you hit the first snag I don't remember how much I posted about the swap.

__________________

actually one of my first questions after looking at the car a little closer is





what in the world did u do for the gauge cluster?????

did u just cut the Rx7 dash a lil wider to fit the mx6 cluster in? or did u just wire in the gauges in a different way.

__________________
ZOOM ZOOM ZOOM
1995 Jeep Grand Cherokee Laredo
2.5" Thrush Glasspack, 2" BB, ProComp 3000 Shocks, Pacer Daytonas, 31x10.5x15 A/T's

I used the mx6 gauges. I actually even printed a background on photopaper that said "MX-7" on it. It's pretty neat. The ultimate plan was to go to autometer tach, speedo, etc/

__________________

so i take it u just honed out the gauge area with a dremel? (the rx7 cluster is smaller)

another thing i'm coming up on is the flywheel/clutch/mating to the transmission whole thing.


i would assume, since it'll be using the bellhousing off the b2200 (that is correct right?) that i'm going to be using a b2200 flywheel and clutch and pressure plate? the probelm there is that it woulnd't ever support that kind of power. does the rx7 clutch etc fit the mx6? i can't find any of ur posts where u list what parts u used on the swap. :p

__________________
ZOOM ZOOM ZOOM
1995 Jeep Grand Cherokee Laredo
2.5" Thrush Glasspack, 2" BB, ProComp 3000 Shocks, Pacer Daytonas, 31x10.5x15 A/T's

bump

what clutch/flywheel setup did you use?

__________________
ZOOM ZOOM ZOOM
1995 Jeep Grand Cherokee Laredo
2.5" Thrush Glasspack, 2" BB, ProComp 3000 Shocks, Pacer Daytonas, 31x10.5x15 A/T's

??

__________________
ZOOM ZOOM ZOOM
1995 Jeep Grand Cherokee Laredo
2.5" Thrush Glasspack, 2" BB, ProComp 3000 Shocks, Pacer Daytonas, 31x10.5x15 A/T's